online message | E-MAIL | 中文版


Bio-based natural fiber PP composite

Product Description
DAOFM PP (Polypropylene) is a natural plant fiber composite material. It is an injection-molded composite material made by mixing 30-50% natural plant long fibers such as coconut, jute and pulp materials with PP polypropylene and through Yunding's unique dispersion and granulation technology. Plant fiber is derived from sustainable and controlled sources and can be recycled or burned. The good properties of Yunding injection grade composite materials are as follows:

low density

Renewable

Good processing performance

No pollution

Core Technology

Can be recycled

High scratch resistance
Dispersion is a key technical challenge while mixing plant fibers into material processing. Combined with our unique mixing technology and chemical additives, this unique process allows us to effectively disperse these plant fibers while maintaining the form and properties of the plant fibers themselves.

Process flow


Product Picture

Technical indicators


Processing technology recommendations
In order not to destroy the plant fiber structure, please control the highest temperature of the injection process below 190 ℃, and the best temperature is about 180-190 ℃.
It is recommended to dry the natural fiber reinforced polypropylene composite at 120 ℃ for more than 3 hours before use.
The material should not stay in the barrel for too long.

Storage
It is recommended that the Yunding reinforced composites be sealed and packaged under dry conditions. Air humidity can increase the moisture content.

Disclaimer
All information is based on our current knowledge and experience.
The injection molding instruction is symbolic.
This information is not a guarantee or qualification of quality.




Photo of injection molded parts
For samples and more product information and quotation detailszb@ydxwm.cnor call 86 13385363002
